LTCLCR096-R

Specification	Value
Minimum beam shape dimension	Ø = 120, x = 99 (mm)
Working distance range	200 – 350 (mm)
Light color, peak wavelength	red, 625 nm
Spectral FWHM	20 (nm)
Supply voltage	12-24 (V)
Max power consumption	2.5 (W)
LED forward voltage typical (max)	2.4 (3) (V)
Max LED forward current	350 (mA)
Max pulse current	2000 (mA)
Connector	M8
Cables	CB244P1500 included
Dimension A	139.0 (mm)
Dimension B	171.9 (mm)
Dimension C	182.9 (mm)
Mass	4142 (g)
Operating temperature	0-40 (°C)
Storage temperature	0-50 (°C)
Operating relative humidity	20-85, non condensing (%)
Installation	Indoor use only
Risk group according to CEI EN 62471:2010	Exempt

Description

Beam shape is not circular. See Tech Info for minimun beam dimensions.
Opto Engineering® recommends green light for high precision measurement applications
Tolerance ± 10%
At max forward current. Tolerance is ± 0.06V on forward voltage measurements
In continuous mode (non-pulsed)
At pulse width <= 10 ms and duty cycle <= 10%. Built-in electronics board must be bypassed (see tech info)
Nominal value, with no spacers in place

Dimension A	139.0 (mm)
Installation	Indoor use only
Light color, peak wavelength	red, 625 nm
Accessory developer	Opto
Minimum beam shape dimension	Ø = 120, x = 99 (mm)
Dimension C	182.9 (mm)
Mass	4142 (g)
Connector	M8
Supply voltage	12-24 (V)
Operating temperature	0-40 (°C)
Storage temperature	0-50 (°C)
Dimension B	171.9 (mm)
Color	red, 625 nm
Working distance range	200 – 350 (mm)
Max power consumption	2.5 (W)
Operating relative humidity	20-85, non condensing (%)
Risk group (cei 62471)	Exempt
Spectral fwhm	20 (nm)
Cables	CB244P1500 included
Led fwd volt (typ/max)	2.4 (3) (V)
Max led forward current	350 (mA)
Max pulse current	2000 (mA)
Operation power source